DECKED Drawer System For 02-18 Dodge RAM 1500, 19-24 Classic & 03-26 2500/3500 8' Bed

INSTALLATION REQUIRES DRILLING: 8 ft beds require drilling to properly secure system.

2019-2021 RAM 1500 NOTE: Ram produced classic and new (updated) body styles for the 2019-2021 1500 pickup. These models require two different drawer systems, make sure you are selecting the correct variant.

CAB-SIDE GAP: On each 8' system, there will be 20" + .5" buffer for manufacturing slack of empty space between the cab of the truck and the end of the DECKED system and the tailgate. A perfect spot to add a DECKED tool box or transfer tank.

Compatible with:

• Spray-in Bed Liners
• DECKED CargoGlide
• DECKED Toolbox (For Cab-side Gap option)
• Stashbins

NOT compatible with:

• 5th Wheel/Gooseneck
• Bedrug / Drop-in Plastic Bed Liner
  
• Stepside/Flareside
  
• Service Body
• Legacy Drawer System Accessories
  
• DECKED Toolbox (For Load Floor Option)
• Retractable Tonneau Covers (For Load Floor Option)

FAQ

1. Is the Drawer System easy to install or remove?
   - Installation is straightforward and typically takes around 2–3 hours with basic hand tools. Having an extra set of hands can make the process even easier. Detailed installation instructions and helpful video guides are available for step-by-step assistance. Once installed, the system can also be removed in as little as 15 minutes when needed.
   
2. How weatherproof/dustproof is a Drawer System?
   - Rain, snow, mud, dust, and nearly anything else the elements can throw at it — your gear stays protected inside the drawers. Engineered with a series of protective closeout panels, the system helps block out moisture, dust, and airborne debris to keep your tools and equipment clean, dry, and secure wherever the road takes you.
   
3. Do you offer Lifetime Warranty?
   - We build the toughest products on the market and we back everything we make with our Limited Lifetime Warranty.
4. What is the DECKED Drawer System made of?
   - High Density Polyethylene
   - Stainless Steel Hardware
   - Cast Aluminum Handles
   - Galvanized Steel Frame
5. Will there be a gap between my Drawer System & Tailgate?
   - Depending on your truck’s make and model, there may be a small gap between the rear of the Drawer System and the tailgate. The DECKED Drawers require approximately 4 inches of clearance to open, while the first 5.5 inches of the drawer are occupied by the handle housing and tapered design. As a result, accessing or removing items from the drawers with the tailgate closed is extremely difficult, adding an extra layer of security for your stored gear.