Fab Fours
Fab Fours Premium Front Bumpers For 2017-2022 Ford F-450
From $2,849.99
Fits 2017–2022 Ford F-450
Confirm your cab and bed configuration at checkout — we verify every order by hand before it ships.
See everything that fits this truckNot sure this is your part? Call (555) 555-0100 — Mon–Fri, 8:00AM–6:00PM ET. We'll confirm fitment before you buy.
- Fitment guaranteed
- 30-day returns
- Secure checkout
- Install support
About this product
If you run 2017–2022 Ford F-450, this is the Fab Fours front bumper for it. Part number FS17-A4261-1. Fab Fours builds 34 versions of it in total, spanning 14 truck models, from $2,119.99 to $3,869.99. Choose from 6 guard style options options at checkout. Ships by freight; the quote is calculated at checkout.
A new design with the same reputation, the Fab Fours New Premium Winch Bumper focuses on strength, durability, and style with the highest quality in the truck market. This bumper is designed to be the ultimate in functionally-stylish front end protection while also providing more tire clearance to eliminate rubbing. Key features are lower mounting sections for additional lighting, D-Ring mounts and ability to accommodate up to 16,500 Pound winches. Available in either a Full Guard, Pre-runner Guard or No Guard Bumper.
ACC Compatible
- Constructed From 3/16 Inch Steel
- Provides Far More Tire Clearance
- Winch Ready – Accepts Up To 16,500 Pound Winches Or Smaller
- Accommodates Factory 360 Degree Camera
- Integrated Adaptive Cruise Control Bracket
- 2-Piece Mounting System With Adjustability To Allow A “custom” Fit
- Limited Lifetime Structural Warranty
Standard Bumper
- Constructed From 3/16 Inch Steel
- 2 Stage Matte Black Power Coat With An Epoxy Primer
- Limited Lifetime Structural Warranty
Product Specifications
Without Grill Guard (ACC Compatible)
| Type | 1-Piece |
| Tubular | No |
| Finish | Satin Powder Coated |
| Color | Black |
| Material | Steel |
| Drilling Required | No |
| Hitch Type | Without Hitch |
| Maximum Gross Trailer Weight | Not Applicable |
| Maximum Tongue Weight | Not Applicable |
| With Grille Guard | No |
| With Grille Screen | No |
| With Bull Bar | No |
| With Winch Mount | Yes |
| Winch Compatible | Yes |
| Tow Hooks | Not Compatible With Tow Hooks |
| D-Rings | With D-Ring Mounts |
| With Light Cutouts | Yes |
| Light Type | 30 Inch Light Bar/ Six 3 Inch Cube Lights - Sold Separately |
| With Mounting Hardware | Yes |
| With Skid Plate | No |
| With Spare Tire Mount | No |
| With License Plate Mount | No |
| With Jacking Points | No |
| With CB Antenna Mount | No |
| Estimated Install Time (Hours) | 4 |
Without Grill Guard (Standard)
| Type | 1-Piece |
| Tubular | No |
| Finish | Matte Powder Coated |
| Color | Black |
| Material | Steel |
| Drilling Required | No |
| Hitch Type | Without Hitch |
| Maximum Gross Trailer Weight | Not Applicable |
| Maximum Tongue Weight | Not Applicable |
| With Grille Guard | No |
| With Grille Screen | No |
| With Bull Bar | No |
| With Winch Mount | Yes |
| Winch Compatible | Yes |
| Tow Hooks | Not Compatible With Tow Hooks |
| D-Rings | With D-Ring Mounts |
| With Light Cutouts | Yes |
| Light Type | 90 Millimeter Round Fog Light/ 60 Millimeter Round Turn Signal Light |
| With Mounting Hardware | Yes |
| With Skid Plate | No |
| With Spare Tire Mount | No |
| With License Plate Mount | Yes |
| With Jacking Points | No |
| With CB Antenna Mount | No |
| Estimated Install Time (Hours) | 4 |
Pre-Runner Guard (ACC Compatible)
| Type | 1-Piece |
| Tubular | No |
| Air Bag Compatible | No |
| Finish | Powder Coated |
| Color | Black |
| Material | Steel |
| Drilling Required | Yes |
| With Mounting Hardware | Yes |
| Hitch Type | Without Receiver |
| Maximum Gross Trailer Weight | Without Receiver |
| Maximum Tongue Weight | Without Receiver |
| With Grille Guard | No |
| With Grille Insert | No |
| With Bull Bar | Yes |
| With Winch Mount | Yes |
| Winch Compatible | Yes |
| Tow Hooks | With Tow Hook Cutouts |
| D-Rings | With Light Cutouts |
| With Light Cutouts | Yes |
| Light Type | 3 Inch Square - Sold Separately |
| With Skid Plate | Yes |
| With Spare Tire Mount | No |
| With License Plate Mount | No |
| With Jacking Points | No |
| With CB Antenna Mount | No |
| Estimated Install Time (Hours) | 4 |
Pre-Runner Guard (Standard)
| Type | 1-Piece |
| Tubular | No |
| Finish | Matte Powder Coated |
| Color | Black |
| Material | Steel |
| Drilling Required | No |
Specifications
SeriesFab Fours Premium Front Bumpers Shipping, returns and installationShippingThis is an oversized item: freight is quoted and confirmed before you pay. In-stock items leave the warehouse in 1–2 business days and typically arrive within 3–6 business days. Full shipping policy Returns30 days to return an unopened, uninstalled part in original packaging. If our fitment data sent you the wrong item, we pay return shipping. Full return policy InstallationMost covers and steps are a 30–60 minute bolt-on with hand tools. Written instructions ship in the box and we keep copies online. Installation guides WarrantyBacked by the full Fab Fours manufacturer warranty. We're an authorized dealer, so claims go through us and get handled directly. Warranty policy Same cover, other trucks Other fitments of this front bumper
Fits the same truck Other gear for 2017–2022 Ford F-450You might also need Related products   Fab Fours Fab Fours Premium Front Bumpers For 2016-2018 Chevrolet Silverado 15002016–2018 Chevrolet Silverado 1500   Fab Fours Premium Front Bumpers For 2017-2022 Ford F-450$2,849.99 Stay in the loop Get $35 off your first orderDrop your email for build inspiration, new product drops and rebate alerts before they expire. No spam, unsubscribe any time. Added to cart |